Control of alloy content for alloy aluminium plate
- Author:Dong Xing
- Source:aluminummanufacturerchina.com
- Release on:2017-09-19
Aluminium alloy is silicon as the main alloying element in aluminum alloy, which belongs to the most alloy non heat treatable alloy aluminum, only copper, magnesium and nickel alloy, welding and heat treatment strengthening alloy absorbs some elements, can be enhanced by heat treatment. The Department of aluminum alloy aluminum with high silicon content, low melting point, good melt fluidity, easy feeding, and won't make the final product brittleness. Thus mainly used to add materials such as aluminium alloy welding, brazing sheet etc.. In addition, because of the good wear resistance and high temperature properties of these alloys, they are also used for piston and heat resistant parts. An alloy containing about 5% silicon, which is black gray after anodizing.
Aluminum is A00 aluminum ingots as raw materials to produce products, when melted ingot in internal added alloy ingot, aluminium alloy ingot melt. Thus when alloy content ratio has great influence on the quality of aluminum alloy, here we will look at aluminum alloy plate manufacturers control for alloys with aluminum alloy. Harbin Dong Xing Aluminum Co., Ltd could provide you with 5052H32 aluminum plate.
Aluminium alloy manufacturers invest on alloy content must be added in accordance with the GB/T3190-2008 standard. The alloy content does not necessarily need to pay attention to the upper limit of alloy content cannot.
The above is the alloy aluminum plate manufacturer in the production process to the alloy content control, along with the processing technology unceasing mature, the alloy aluminum plate is also unceasingly breaks through the innovation.
Aluminum is A00 aluminum ingots as raw materials to produce products, when melted ingot in internal added alloy ingot, aluminium alloy ingot melt. Thus when alloy content ratio has great influence on the quality of aluminum alloy, here we will look at aluminum alloy plate manufacturers control for alloys with aluminum alloy. Harbin Dong Xing Aluminum Co., Ltd could provide you with 5052H32 aluminum plate.
Aluminium alloy manufacturers invest on alloy content must be added in accordance with the GB/T3190-2008 standard. The alloy content does not necessarily need to pay attention to the upper limit of alloy content cannot.
The more, the better., so in the process of adding more than the provisions, if more than the upper limit will belong to the unqualified products. If you accidentally add quantity is also need to put aluminum ingots for dilution, if the investment proportion less into the corresponding alloy ingot to improve the alloy content. Harbin Dong Xing Aluminum Co., Ltd is a competent and reliable Aluminum plate manufacturer china.
It is because the alloy aluminum alloy containing different proportion to have mechanical properties and different chemical characteristics.
The above is the alloy aluminum plate manufacturer in the production process to the alloy content control, along with the processing technology unceasing mature, the alloy aluminum plate is also unceasingly breaks through the innovation.
If you want to get more information about Harbin Dong Xing Aluminum Co., Ltd, please click 5053H112 aluminum plate.