Cleaning of aluminium plate before deep processing
Dong Xing
aluminummanufacturerchina.com
2017-09-15 20:07:09
Aluminium alloy is one of the main products of our company, it is through the melting aluminum ingots or aluminum casting rolling or extrusion into a rectangular plate, are widely used in many fields and aluminum industry, must first carry out cleaning work in deep processing of aluminum, so aluminum products of higher quality. To ensure the quality of products, at the same time, ensure the production efficiency, to introduce below is about cleaning steps before the deep processing of aluminum alloy:
1, first of all, to be cleaned on the surface of aluminum liquid, choice of water, so the purpose is to get wet wet aluminum surface stains. Harbin Dong Xing Aluminum Co., Ltd could provide you with Aluminum marine sheet.
2, use has soaked with detergent soft cloth on the aluminum plate wipe, but pay attention to detergent should be diluted with water, otherwise it may cause certain corrosion to aluminum plate, affect the use of aluminum plate.
3 rinse the detergent bubbles or stains with clean water. Harbin Dong Xing Aluminum Co., Ltd is a competent and reliable Aluminum plate manufacturer china.
4, at this time to carefully check the aluminum plate surface, but whether there is a stain point, and if there is no cleaning dry point, and then use the above three methods to continue again, until the stain clean.
5. Make sure that the surface of the aluminum sheet is clean, and then clean the remaining water stains on the aluminum sheet with clean cloth, and also dry by drying or blowing cold air.
The cleaning process of aluminum alloy plate before the deep processing is mentioned above. After cleaning, the aluminum plate can be used safely.
1, first of all, to be cleaned on the surface of aluminum liquid, choice of water, so the purpose is to get wet wet aluminum surface stains. Harbin Dong Xing Aluminum Co., Ltd could provide you with Aluminum marine sheet.
2, use has soaked with detergent soft cloth on the aluminum plate wipe, but pay attention to detergent should be diluted with water, otherwise it may cause certain corrosion to aluminum plate, affect the use of aluminum plate.
4, at this time to carefully check the aluminum plate surface, but whether there is a stain point, and if there is no cleaning dry point, and then use the above three methods to continue again, until the stain clean.
5. Make sure that the surface of the aluminum sheet is clean, and then clean the remaining water stains on the aluminum sheet with clean cloth, and also dry by drying or blowing cold air.
The cleaning process of aluminum alloy plate before the deep processing is mentioned above. After cleaning, the aluminum plate can be used safely.
If you want to get more information about Harbin Dong Xing Aluminum Co., Ltd, please click Aluminum sheet for boat.